Basic installation steps of induction furnace
Induction electric furnace is the main melting equipment in the foundry industry. Design and manufacturing are very critical links. In addition to strong technical support, a rigorous and meticulous manufacturing attitude must be used. These are also the foundation of Shandong Huaxin Electric Furnace Co., Ltd. But in addition, after the induction electric furnace is transported to the user’s work site, the induction electric furnace needs to be carefully installed and debugged to ensure that the induction electric furnace can operate stably.
Preparation work before installation of induction furnace
- First, check whether the main components and installation materials of the induction furnace are complete according to the installation list of the induction furnace, and check their quality. Some parts and materials will have various defects due to improper transportation and storage. They should be repaired so that all equipment, parts, corresponding materials and parts are intact to ensure the smooth progress of future installation and commissioning.
- Secondly, check and accept the various civil construction facilities related to the induction furnace, such as checking whether the main dimensions in the layout are correct; check whether the foundation, trench and embedded parts required for the installation of various electrical equipment and main busbars conform to the design Requirements, whether the induction furnace foundation, platform elevation, deviation of the vertical and horizontal axes, and the position of the anchor screws are within the specified size range; check whether the construction quality of the foundation and platform meets the requirements. Only after the above preparations are completed, can the furnace be installed.
Installation process of induction furnace
The installation of the induction furnace should meet the requirements of the drawings. The first is to install the furnace frame on the basis of the induction electric furnace, and then install the tilting cylinder and furnace body. If there is a weighing device, it should be installed in the specified position according to the requirements of the drawing. The furnace bracket (for the crucible induction furnace includes a fixed bracket and a movable bracket) and the furnace body part, during the processing, the thermal deformation caused by the welding construction should be limited to the specified range of the design, only in this way can ensure the future The work went smoothly.