Your current browser version is too low, in order to bring you a better browsing effect, please use a higher version browser

You Are Here: home-Blog

3 Ton titling type steel scrap induction melting furnace

Product selling point of 3 Ton titling type steel scrap induction melting furnace:
1. Intelligent equipment, easy to operate, high stability
2. High efficiency and energy consumption less than 550KWH/T
3. Electronic components using well-know brands at home and abroad

SCR series rectifier , series resonant inverter medium frequency power supply
Our series resonant inverter medium frequency power supply can achieve that one furnace melting and the other furnace thermal insulation refining .So that this advanced technology achieves that one set of equipment is equivalent to two sets of equipment working at the same time.And the utilization rate of power transformer is very high.According to the theoretical calculation and field test, it can save half of the transformer capacity.Because of adopting SCR series rectifier , series resonant inverter it is with high power factor and keeps over 0.98 with high order harmonic wave pollution.It is no need to add reactive power compensation device and harmonic wave control device.The current of induction coils are small and the melting time is short.It can save electricity 20%.
Advantages of 3t steel melting furnace:

1. With strong and durable, beautiful and generous furnace body.Especially for large capacity furnace which need the stronger steel structure .From the point of view of safety dumping has better adopt steel shell furnace.
2. Selenium steel made of magnetic yoke of the magnetic field lines generated by the induction coil has played the role of shielding emission to reduce the magnetic leakage so that it improves the efficiency and energy saving is 5%~8%.
3. The furnace cover reduces heat loss and improves the equipment safety.
4. Cyclone type smoke hood has excellent dust absorption , thermal insulation effect and take up a small space.
Welcome to enquire further information and details. For any question or technical support, please feel free to contact us directly.We will do our best to offer you the best products and advice, it’s our unswerving pursuit !
All metal workpiece can be heat treated, brazing, hardeing, annealed, tempered, heated,melted, saw saw being welded, quenched, and copper tube being brazing,