The yoke of the medium frequency melting furnace
Shandong Huaxin Electric Furnace Co., Ltd. medium frequency melting electric furnace yoke adopts Baosteel and Wuhan Iron and Steel high-quality high-permeability cold-rolled silicon steel sheets. The arc-shaped stacking is closer to the induction coil of the medium frequency furnace. The contact part between the stainless steel plate and the silicon steel sheet on the surface of the medium frequency furnace yoke is separated by a high-grade phlogopite plate. The outside is clamped and welded by a stainless steel plate, and the stainless steel plate is welded The radiating groove or radiating water tank is cooled with water through the yoke, and 4-8 stainless steel bolts are clamped and locked on both sides of the yoke of the medium frequency furnace to avoid deformation due to temperature rise, covering 60% of the surface of the medium frequency furnace coil, which is effective The magnetic field lines are gathered in the molten pool to prevent the heating of the furnace shell of the medium frequency furnace, which improves the efficiency of the system, stable performance and reliable support for the coil of the medium frequency furnace.